Filter
Top Products
Solaris SFS Driver User Manual Page 79
Adding a Range of Hosts
You can find the OOB manageable hosts by searching a range of IP addresses using the Add Range of
IP Hosts dialog box.
Figure 43: HBAnyware Utility, Add Remote Hosts Window
The Add Range of IP Hosts dialog box enables you to build the initial list of OOB manageable hosts.
To add a range of hosts:
1. Start the HBAnyware utility.
2. From the Discovery menu, select Out-of-Band/Add Range of Hosts. The Add Range of IP
Hosts dialog box appears.
3. Enter the complete start and end address range and click Add. The added address range
appears in the dialog box. Add any additional ranges you wish to search.
4. Click Start Discovery. HBAnyware checks each address in the range to determine if the host is
available and remotely manageable. The number of addresses discovered (of manageable
hosts) is periodically updated on the dialog box.
5. When the search is complete, click Cancel.
Note: The number of addresses does not correspond directly to the
number of hosts added to the discovery-tree.
For example, some of the addresses discovered may be for hosts that have
already been discovered in-band. However, new HBAs may be discovered
on those hosts that were not discovered in-band.
Also, a host may have more than one HBA installed and both IP addresses
for that host are discovered during the search, but only one host will
possibly be added to the discovery-tree.