Filter
Top Products
Solaris SFS Driver User Manual Page 159
MSG_ID: 1522 Error: Firmware Download Failed
VERBOSE_MASK: LOG_FIRMWARE (0x00008000)
DESCRIPTION: This indicates that an attempt to download a firmware image was failed.
SEVERITY LEVEL: Error
MESSAGE: Firmware download failed
ACTION: Check your hardware configuration. If problems persist, report these errors to Technical Support.
Common Transport Events
MSG_ID: 1600 Debug: CT sent
VERBOSE_MASK: LOG_CT (0x00010000)
DESCRIPTION: This indicates that a CT command is being sent.
SEVERITY LEVEL: Debug
MESSAGE: CT sent
ACTION: No action needed, informational.
MSG_ID: 1601 Debug: CT comp
VERBOSE_MASK: LOG_CT (0x00010000)
DESCRIPTION: This indicates that a CT command completed normally.
SEVERITY LEVEL: Debug
MESSAGE: CT comp
ACTION: No action needed, informational.
MSG_ID: 1610 Error: Stray CT completion
VERBOSE_MASK: LOG_CT(0x00010000)
DESCRIPTION: This indicates that a CT command completion was received without issuing a
corresponding CT command. This error could indicate a driver or firmware problem.
SEVERITY LEVEL: Error
MESSAGE: Stray CT completion
ACTION: No action needed. If problems persist, report these errors to Technical Support.
MSG_ID: 1611 Debug: Abnormal CT completion
VERBOSE_MASK: LOG_CT(0x00010000)
DESCRIPTION: This indicates that a CT command completed with a status error in the IOCB. It could
mean the FC device on the network is not responding. The driver will automatically retry this CT command
if needed.
SEVERITY LEVEL: Debug
MESSAGE: Abnormal CT completion
ACTION: Check physical connections to FC network and the state of the remote PortID.
MSG_ID: 1620 Debug: CT rcvd
VERBOSE_MASK: LOG_CT(0x00010000)
DESCRIPTION: This indicates that an unsolicited CT command was received.
SEVERITY LEVEL: Debug
MESSAGE: CT rcvd
ACTION: No action needed, informational.