Filter
Top Products
Solaris SFS Driver User Manual Page 42
Viewing Host Information
There are two tabs that show host information: the Host Information tab and the host Driver Parameters
tab. The Host Information tab is read-only. The host Driver Parameters tab enables you to view and
define HBA driver settings for a specific host.
To view the Host Information and Driver Parameters tabs:
1. Start the HBAnyware utility.
2. Do one of the following:
• From the menu bar, click View, then click Sort by Host Name.
• From the toolbar, click the Sort by Host Name button.
3. Select a host in the discovery-tree.
4. Select the Host Information tab (see Figure 7) or the Host Driver Parameters tab (Figure 8).
The Host Information Tab
Figure 7: HBAnyware Utility, Host Information Tab
Host Information Field Definitions
• Number of Adapters - The number of HBAs installed in the host.
• Number of Fabrics - The number of fabrics to which this host is attached.
• Number of Targets - The number of storage devices seen by the host.
• Remote Manager Server Version - The version of the HBAnyware utility server that is running on
the host. If different versions of the HBAnyware utility are installed on different hosts in the SAN,
those differences appear in this field.
• Host IP Address - If the host is discovered in-band, the dialog box displays "Host discovered in-
band." If the host is discovered out-of-band, the dialog box displays the host's IP address, e.g.,
138.239.82.131.