Filter
Top Products
Solaris SFS Driver User Manual Page 24
If you don’t know the IP address, but you know the host name, type:
hbacmd h=cp-compaq8000 listHBAs
If the host is unreachable, the command will return an error.
CLI Client Command Reference
Version
Syntax: HBACMD Version
Description: Shows the current version of the HBAnyware CLI client application. To view the version,
type:
hbacmd version
Sample response:
HBAnyware Command Line Interface: Version 3.0
Parameters: None.
ListHBAs
Syntax: HBACMD ListHBAs
Description: Shows a list of the discovered manageable Emulex HBAs and some of their attributes. The
list will contain one 6-attribute group for each discovered HBA. Example of an attribute group list:
Manageable HBA List
Port WWN: 10:00:00:00:c9:20:08:cc
Node WWN: 20:00:00:00:c9:20:08:cc
Fabric Name:10:00:00:60:69:90:0b:f6
Flags: 0000f900
Host Name: CP-EMULEX-DECPC
Mfg: Emulex Corporation
Parameters: None.
SaveConfig
Syntax: HBACMD SaveConfig <wwpn> <filename> <ctrlword>
Description: Saves the contents of the driver parameter list to a file for the specified HBA. The ASCII file
lists parameter definitions, delimited by a comma. Each definition is of the form:
<parameter-name>=<parameter-value>
Save either the values of the global set or those specific to the referenced HBA. The file created by this
command stores itself in the Emulex Repository directory.
Example:
hbacmd SaveConfig elxstor-5-1.20A0.dpv 10:00:00:00:c9:2e:51:2e N
Sample response:
HBACMD_SaveConfig: Success writing driver parameters to file
C:\Program Files\HBAnyware\Emulex Repository\elxstor-5-1.20A.dpv
Parameters:
WWPN - The World Wide Port Name of the HBA. This HBA can be either local or remote.
filename - The file name that will contain the driver parameter list upon successful completion of this
command.
ctrlword - G = save the global parameter set. N = save the local (HBA-specific) parameter set.