Filter
Top Products
Solaris SFS Driver User Manual Page 148
Mailbox Events
MSG_ID: 0500 Debug: Mailbox Event
VERBOSE_MASK: LOG_MBOX (0x00000020)
DESCRIPTION: This indicates that a mailbox event has occurred.
SEVERITY LEVEL: Debug
MESSAGE: Mailbox event
ACTION: No action needed, informational.
MSG_ID: 0501 Debug: Mailbox Detail
VERBOSE_MASK: LOG_MBOX _DETAIL (0x40000000)
DESCRIPTION: This provides detailed information about a mailbox event.
SEVERITY LEVEL: Debug
MESSAGE: Mailbox detail
ACTION: No action needed, informational.
MSG_ID: 0510 Debug: Stray Mailbox Interrupt
VERBOSE_MASK: LOG_MBOX (0x00000020)
DESCRIPTION: This indicates that a mailbox command completion interrupt was received and the mailbox
is not valid. This error could indicate a driver or firmware problem.
SEVERITY LEVEL: Debug
MESSAGE: Stray mailbox interrupt
ACTION: No action needed, informational. If problems persist, report these errors to Technical Support.
MSG_ID: 0520 Error: Mailbox Completion Error
VERBOSE_MASK: LOG_MBOX (0x00000020)
DESCRIPTION: This indicates that an unsupported or illegal mailbox command was completed. This error
could indicate a driver or firmware problem.
SEVERITY LEVEL: Error
MESSAGE: Mailbox completion error
ACTION: No action needed. If problems persist, report these errors to Technical Support.
Node Events
MSG_ID: 0600 Debug: Node Create
VERBOSE_MASK: LOG_NODE (0x00000040)
DESCRIPTION: This indicates that a node has been created for a remote device.
SEVERITY LEVEL: Debug
MESSAGE: Node create
ACTION: No action needed, informational.
MSG_ID: 0601 Debug: Node Opened
VERBOSE_MASK: LOG_NODE (0x00000040)
DESCRIPTION: This indicates that a node has been opened for I/O transport.
SEVERITY LEVEL: Debug
MESSAGE: Node opened.
ACTION: No action needed, informational.