Filter
Top Products
Solaris SFS Driver User Manual Page 78
Adding a Single Host
The HBAnyware utility enables you to specify a single OOB host to manage. If the host is successfully
discovered as a manageable host, it is added to the static list of hosts and if it has not been discovered
in-band, the host and its HBAs are added to the discovery tree.
To add a single host:
1. Start the HBAnyware utility.
2. From the Discovery menu, select Out-of-Band/Add Host. The Add Remote Host dialog box
appears.
Figure 42: HBAnyware Utility, Add Remote Host Dialog Box
3. Enter the name or the IP address of the host to be added. Entering the IP address is the best
way to add a new host.
4. Click OK. You will receive a message indicating whether or not the new host was successfully
added.
Note: Using the IP address to identify the host avoids name resolution issues.