Filter
Top Products
Solaris SFS Driver User Manual Page 130
clear_all
Clears driver bindings to all devices. You may see the message "Cannot unload module". This indicates
that you must reboot the system to get a driver to unbind from that adapter alias; emlxdrv only updates
the system configuration for the next boot.
Example:
emlxadm> clear_all
Updating lpfs ...
Cannot unload module: emlxs
Will be unloaded upon reboot.
Updating f800 ...
Cannot unload module: emlxs
Will be unloaded upon reboot.
Updating f900 ...
Cannot unload module: lpfc
Will be unloaded upon reboot.
Updating f980 ...
Cannot unload module: lpfc
Will be unloaded upon reboot.
Updating fa00 ...
Cannot unload module: emlxs
Will be unloaded upon reboot.
Updating fd00 ...
Cannot unload module: emlxs
Will be unloaded upon reboot.
Updating fe00 ...
Cannot unload module: emlxs
Will be unloaded upon reboot.
Updating fc00 ...
Cannot unload module: emlxs
Will be unloaded upon reboot.
Updating fc10 ...
Cannot unload module: emlxs
Will be unloaded upon reboot.
Updating fc20 ...
Cannot unload module: emlxs
Will be unloaded upon reboot.
Done.
q
Exits the program. If changes were made to the driver bindings, a system reboot is usually required for
all the changes to take effect.
Example:
emlxdrv> q
Exiting...
NOTE: If changes were made, then a system reboot may be required.
#