Filter
Top Products
Solaris SFS Driver User Manual Page 27
WWPN - The World Wide Port Name of any HBA local to the designated server. The HBA itself can be
either local or remote.
TargetMapping
Syntax: HBACMD TargetMapping <wwpn>
Description: Shows a list of mapped targets and the LUNs attached to each for the port with the
specified WWPN. To view the target mapping for 10:00:00:00:c9:20:08:0c, type:
hbacmd targetmapping 10:00:00:00:c9:20:08:0c
Sample response:
Target Mapping for 10:00:00:00:c9:4a:c5:90
FCP ID : 115E2
SCSI Bus Number: 0
SCSI Target Num: 0
Node WWN : 50:00:60:E8:02:78:6E:03
Port WWN : 50:00:60:E8:02:78:6E:03
Tgt Device Name: /dev/sdb
FCP LUN 00 : 0000 0000 0000 0000
SCSI OS Lun : 0
Lun Device Name: /dev/sdb
Vendor ID : HITACHI
Product ID : OPEN-3
Product Version: 0118
SCSI Capacity : 2347 MB
Block Size : 512 Bytes
FCP LUN 01 : 0001 0000 0000 0000
SCSI OS Lun : 1
Lun Device Name: /dev/sdb
Vendor ID : HITACHI
Product ID : OPEN-3
Product Version: 0118
SCSI Capacity : 2347 MB
Block Size : 512 Bytes
FCP LUN 02 : 0002 0000 0000 0000
SCSI OS Lun : 2
Lun Device Name: /dev/sdb
Vendor ID : HITACHI
Product ID : OPEN-3
Product Version: 0118
SCSI Capacity : 2347 MB
Block Size : 512 Bytes
Parameters:
WWPN - The World Wide Port Name of the port. This port can be either local or remote.
Reset
Syntax: HBACMD Reset <wwpn>
Description: Resets the HBA with the specified WWPN. Resetting an HBA may require several seconds
to complete, especially for remote devices. This command will return for additional input only after the
reset has finished. To reset an HBA whose WWPN is 10:00:00:00:c9:e:51:2e, type:
hbacmd reset 10:00:00:00:c9:2e:51:2e
Sample response:
Reset HBA 10:00:00:00:c9:2e:51:2e