Filter
Top Products
Solaris SFS Driver User Manual Page 88
Removing Security from all Servers in the ACG
You can remove security from all systems only from the Master Security Client (MSC). Removing the
entire security topology on all of the servers in the MSC's ACG puts the servers in an unsecure state.
The MSC is also put in an unsecure state; consequently, it is no longer the MSC. Any participating
systems that are not online will not receive the 'remove security' configuration update, and as a result
will no longer be accessible remotely.
To remove security from all servers in the ACG:
1. Start the HBAnyware Security Configurator. The Access Control Group tab is displayed.
Figure 53: Security Configurator, Access Control Group Tab
2. On the Access Control Group tab, click the Remove Security button. The following message is
displayed:
Figure 54: The HBAnyware Security Configurator “Warning” Dialog Box
3. Click Yes. Security is removed from all servers in the ACG.