Filter
Top Products
Solaris SFS Driver User Manual Page 143
MSG_ID: 0112 Debug: Driver Detach
VERBOSE_MASK: LOG_DRIVER (0x00000002)
DESCRIPTION: This indicates that the driver is performing an detach operation.
SEVERITY LEVEL: Debug
MESSAGE: Driver detach
ACTION: No action needed, informational.
MSG_ID: 0120 Debug: Driver Suspend
VERBOSE_MASK: LOG_DRIVER (0x00000002)
DESCRIPTION: This indicates that the driver is performing a suspend operation.
SEVERITY LEVEL: Debug
MESSAGE: Driver suspend
ACTION: No action needed, informational.
MSG_ID: 0121 Error: Driver Suspend Failed
VERBOSE_MASK: LOG_DRIVER (0x00000002)
DESCRIPTION: This indicates that the driver was unable to suspend due to some issue.
SEVERITY LEVEL: Error
MESSAGE: Driver suspend failed
ACTION: Check your hardware and software configuration. If problems persist, report these errors to
Technical Support.
MSG_ID: 0130 Debug: Driver Resume
VERBOSE_MASK: LOG_DRIVER (0x00000002)
DESCRIPTION: This indicates that the driver is performing a resume operation.
SEVERITY LEVEL: Debug
MESSAGE: Driver resume
ACTION: No action needed, informational.
MSG_ID: 0131 Error: Driver Resume Failed
VERBOSE_MASK: LOG_DRIVER (0x00000002)
DESCRIPTION: This indicates that the driver was unable to resume due to some issue.
SEVERITY LEVEL: Error
MESSAGE: Driver resume failed
ACTION: Check your hardware and software configuration. If problems persist, report these errors to
Technical Support.
HBA Initialization Events
MSG_ID: 0200 Notice: Adapter Initialization
VERBOSE_MASK: LOG_INIT (0x00000004)
DESCRIPTION: This indicates that the adapter is initializing.
SEVERITY LEVEL: Notice
MESSAGE: Adapter Initialization
ACTION: No action needed, informational.