Filter
Top Products
Solaris SFS Driver User Manual Page 139
Console and Log Messages
Introduction
Log messages are logged to the /var/adm/messages system file.
Table 7: Notice, Warnings and Error Types
Table 8 lists the types of log messages that can be logged to the system file.
Driver Parameter
Default/
Min/Max
Effect of Changing
Default
Related lpfc Driver Parameters
console-notices 0 Sets the verbose level for
driver notices to the
console.
log-only (when set to 0, log
messages are logged to the
system log file and also printed on
the console.)
Default = Disabled
console-warnings 0 Sets the verbose level for
driver warnings to the
console.
console-errors 0 Sets the verbose level for
driver errors to the console.
log-notices 0xffffffff; Sets the verbose level for
driver notices to the system
log file.
log-verbose (when set to non-zero,
verbose messages are generated.)
Default = Disabled
log-warnings 0xffffffff; Sets the verbose level for
driver warnings to the
system log file.
log-errors 0xffffffff; Sets the verbose level for
driver errors to the system
log file.
Table 8: Log Message Types
LOG Message Verbose
Mask
Verbose Bit
Verbose Description
LOG_MISC 0x00000001 Miscellaneous events
LOG_DRIVER 0x00000002 Driver attach and detach events
LOG_INIT 0x00000004 HBA Initialization events
LOG_MEM 0x00000008 Memory management events
LOG_SLI 0x00000010 Service Level Interface (SLI) events
LOG_MBOX 0x00000020 Mailbox events
LOG_NODE 0x00000040 Node events
LOG_LINK 0x00000080 Link events
LOG_ELS 0x00000100 ELS events
LOG_PKT 0x00000200 General I/O packet events