Filter
Top Products
Solaris SFS Driver User Manual Page 154
MSG_ID: 0932 Debug: Packet Transport
VERBOSE_MASK: LOG_PKT (0x00000200)
DESCRIPTION: This provides additional information about a packet being sent.
SEVERITY LEVEL: Debug
MESSAGE: Packet transport
ACTION: No action needed, informational.
MSG_ID: 0940 Debug: Packet Completion Error
VERBOSE_MASK: LOG_PKT (0x00000200)
DESCRIPTION: This indicates that an I/O packet was completed with an error status. This can occur
during normal operation.
SEVERITY LEVEL: Debug
MESSAGE: Packet completion error.
ACTION: No action needed, informational. If problems persist, report these errors to Technical Support.
FCP Traffic Events
MSG_ID: 1000 Debug: Stray FCP Completion
VERBOSE_MASK: LOG_FCP (0x00000400)
DESCRIPTION: This indicates that an FCP command completion was received without issuing a
corresponding FCP command. This error could indicate a driver or firmware problem.
SEVERITY LEVEL: Debug
MESSAGE: Stray FCP completion
ACTION: No action needed, informational. If problems persist, report these errors to Technical Support.
MSG_ID: 1001 Debug: FCP Completion Error
VERBOSE_MASK: LOG_FCP (0x00000400)
DESCRIPTION: This indicates that an FCP command completed with an error status. These errors can
occur during normal operation.
SEVERITY LEVEL: Debug
MESSAGE: FCP completion error
ACTION: No action needed, informational.
IP Traffic Events
MSG_ID: 1200 Debug: IP Detail
VERBOSE_MASK: LOG_IP_DETAIL (0x08000000)
DESCRIPTION: This provides detailed information about the driver’s IP interface.
SEVERITY LEVEL: Debug
MESSAGE: IP detail
ACTION: No action needed, informational.
MSG_ID: 1210 Error: Stray IP Completion
VERBOSE_MASK: LOG_IP (0x00001000)
DESCRIPTION: This indicates that an IP sequence completion was received without issuing a
corresponding IP sequence. This error could indicate a driver or firmware problem.
SEVERITY LEVEL: Error
MESSAGE: Stray IP completion
ACTION: No action needed. If problems persist, report these errors to Technical Support.