Filter
Top Products
Solaris SFS Driver User Manual Page 47
• Class-1 provides a dedicated connection between a pair of ports confirmed with delivery
or notification of nondelivery.
• Class-2 provides a frame switched service with confirmed delivery or notification of non-
delivery.
• Class-3 provides a frame switched service similar to Class-2 but without notification of
frame delivery or non-delivery.
• Supported FC4 Types - a 256-bit (8-word) map of the FC-4 protocol types supported by the port
containing the selected HBA.
Loop Map Table Definitions
• The loop map shows the different ports present in the loop, and is present only if the port (HBA)
is operating in loop mode. The simplest example would be to connect a JBOD directly to an
HBA. When this is done, the port type will be a private loop, and the loop map will have an entry
for the HBA, and one entry for each of the disks in the JBOD.
Viewing Fabric Information
The Discovery Information area contains information about the selected fabric.
To view the fabric information:
1. Start the HBAnyware utility.
2. Do one of the following:
• From the menu bar, click View, then click Sort by Fabric ID.
• From the toolbar, click the Sort by Fabric ID button.
3. Click on a fabric address in the discovery-tree. The Discovery Information tab shows information
about the selected fabric.
Figure 11: HBAnyware Utility, Discovery Information