Filter
Top Products
Chapter 2-Additional Conferencing Information
2-80
Defining the Cascading Conferences
The table below lists the line rates and the video settings that should be
used when defining the conferences on the MGC. The same line rates
should be selected when defining the Conference Profiles on the
RMX 2000, as well as whether the conference is HD Video Switching.
However, the video settings will be automatically selected by the system.
In addition, the conference running on the MGC should be set as Meet Me
Per Conference and select the H.239 option in the Dual Stream Mode field.
For more details on conference definition on the MGC, refer to the MGC
Manager User’s Guide, Volume I, Chapter 5.
Defining the Dial-out Participant on the RMX 2000
If the dialing is done from a conference running on the RMX 2000 to the
conference running on the MGC, the dial-out participant is defined in the
conference running on the RMX, setting the Cascade field to Slave. This
participant dials the Cascade-enabled Entry Queue defined on the MGC.
1 Display the list of participants in the linked conference (Slave
conference).
2 In the Participant List pane, click the New Participant ( ) button.
Table 2-19 Recommended Conference Line Rates for Cascaded Conferences
Topology Video Session Mode
Conference Line
Rate
MGC
RMX 2000
MGC - CIF 263
RMX2000 - CIF 264 CP
768Kb/s, 2Mb/s
MGC - HD VSW
RMX2000 - HD VSW
1.5Mb/s