Chapter 17-RMX Administration and Utilities
17-72
9 Click the Traps tab.
The RMX-SNMP Properties – Traps dialog box opens.
Traps are messages sent by the MCU to the SNMP Managers when
events such as MCU Startup or Shutdown occur. Traps may be sent
to several SNMP Managers whose IP addresses are specified in the
Trap Destinations box.
10 Define the following parameters:
Table 17-16 RMX-SNMP Properties – Traps Options
Field Description
SNMP Trap Version Specifies the version, either Version1 or Version2c, of
the traps being sent to the IP Host. Polycom software
supports the standard SNMP version 1 and 2 traps,
which are taken from RFC 1215, convention for
defining traps for use with SNMP:
Note: The SNMP Trap Version parameters must be
defined identically in the external SNMP application.