Filter
Top Products
Appendix B-Alarms and Faults
B-2
Backup of CDR files is required If the ENABLE_CYCLIC_FILE_SYSTEM_ALARMS is
set to YES (default setting when JITC_MODE System
Flag is set to YES) and a Cyclic File reaches a file
retention time or file storage capacity limit, the user is
alerted that CDR files need to be backed up.
Backup of log files is required If the ENABLE_CYCLIC_FILE_SYSTEM_ALARMS is
set to YES (default setting when JITC_MODE System
Flag is set to YES) and a Cyclic File reaches a file
retention time or file storage capacity limit, the user is
alerted that log files need to be backed up.
Bios version is not compatible with
Enhanced Security Mode.
The current BIOS version is not compatible with
Enhanced Security Mode (JITC_MODE=YES).
Card failed to switch to Enhanced
Security Mode
Card failure occurred when the system was set to
Enhance Security Mode (JITC_MODE=YES).
Card failure Possible reasons for the card failure:
• Resetting Card
• Resetting component
• Unknown shelf error
• Unknown card error
Card not found This occurs when: the system does not receive an
indication about the card (since it does not exist…)
usually when the card was removed from the MCU and
the system did not have a chance to recalculate it
resources.
Card not responding Possible reasons for the card not responding:
• No connection with MPM card.
• No connection with the Switch.
Table B-1 Alarms (Continued)
Alarm Code Alarm Description