Filter
Top Products
Chapter 16-RMX Manager Application
16-28
Installing RMX Manager for Secure Communication Mode
The RMX Manager cannot be downloaded from a site, operating in Secure
Communication Mode, without a valid TLS certificate.
The following procedure describes how to obtain a TLS certificate and
download the RMX Manager from a site operating in Secure
Communication Mode.
To install the RMX Manager:
1 Set the RMX to Non Secure Communication Mode
a In the RMX Management pane, click IP Network Services.
b In the IP Network Services list pane, double click the Management
Network entry.
The Management Network Properties dialog box is displayed.
FIPS is always enabled in JITC Mode, and when ClickOnce is used to install
RMX Manager, the workstation must have one of the following installed:
• .NET Framework 3.5 or a later version of the .NET Framework.
• .NET Framework 2.0 plus Service Pack 1 or later.