Filter
Top Products
Chapter 16-RMX Manager Application
16-8
If you are connecting to any MCU from the MCUs pane in the RMX
Manager Main screen and have defined the Username and Password
for the connecting MCU, the MCU icon changes to connected and its
status, type and number of audio and video resources are displayed
in the MCUs pane.
If the Username and Password are missing from the MCU parameters,
or if the Remember Me check box has been cleared, the Connect dialog
box opens.
2 In the Username field, enter the user name with which you will login
to the MCU.
3 In the Password field, enter the password as defined for the user name
with which you will login to the MCU.
4 To add the Username and password to the MCU properties so you
will not have to enter them each time you login to the MCU, make
sure that the Remember Login check box is selected. Otherwise, clear
the Remember Login check box.
5 Click OK.
The system connects to the RMX, and the RMX Manager Main screen is
displayed.
If a User with the entered Username and Password is not defined in the
RMX, an error message is displayed and the system lets you re-enter
the Username and Password.