Filter
Top Products
Polycom RMX 2000/4000 Administrator’s Guide
18-17
To view the Card Properties:
1 In the Hardware Monitor pane, either double-click or right-click and
select Properties for the desired hardware component.
The following information is displayed:
2 Click the Event Log tab to view a log of events that was recorded by
the system on the HW component.
For more information, see "MCU Properties - Event Log” on page 17-6.
3 Click the Active Alarms tab to view alarms related to the hardware
component, i.e. temperatures and main power sensors.
For more information, see “Active Alarms” on page 17-7.
4 Click Close to return to the HW Monitor pane.
Table 18-10 Card Properties - General Info
Field Description
HW Version The hardware component’s version number.
SW Version The version number of the software installed on
card.
Serial Number The hardware component’s serial number.
Card Type Displays the type of card that occupies the slot.
Board Part
Number
The part number of the HW component’s board.
Board Mac
Address 1
Specific hardware address of the component. This
address is burnt onto the component and is
automatically identified by the system.
Board Mac
Address 2
(If applicable) second Mac address.