Filter
Top Products
Chapter 16-RMX Manager Application
16-4
4 Select the required language by clicking its flag.
The Next button is enabled.
5 Click the Next button.
The RMX Manager - MCUs screen is displayed.
The first time you start the RMX Manager application, the RMX unit
used for downloading the RMX Manager application is automatically
defined and listed in the MCUs pane. If the RMX Manager was
downloaded from Polycom Support web site, this pane is empty.
This screen becomes the opening screen from the second time the
RMX Manager application is started.
For each listed MCU, the system displays the following information:
— MCU Display Name (as defined in the Add MCU dialog box). The
MCU that was automatically added to the list, the MCU IP
address is used as the Display Name.
— IP Address of the MCU’s control unit
MCUs Pane
MCUs Toolbar
When the RMX is automatically added to the MCUs list, the User Name and
Password, which enable login to the RMX, are missing. You can either enter
them manually when you login to the RMX, or you can add them to the RMX
defined parameters.