Polycom RMX 2000/4000 Administrator’s Guide
12-39
RMX 2000
Network Separation is enabled/disabled according to the settings of the
SEPARATE_MANAGEMENT_NETWORK and JITC_MODE System
Flags. When both System Flags are set to YES, all signaling between IP
endpoints and the RMX is via the LAN 2 port, while all RMX
management sessions are hosted via the LAN 3 port.
Enabling Network Separation
To enable Network Separation:
1 On the RMX menu, click Setup > System Configuration.
The System Flags dialog box opens.
IP Endpoints
RMX Web Client / RMX Manager
Management Sessions
LAN 2 Port - Signaling
LAN 3 Port - Management
RMX
After Network Separation has been performed, the Alternate Management
Network is no longer available for support purposes. For more information, see
"Alternate Management Network” on page G-1
