Filter
Top Products
Polycom RMX 2000/4000 Administrator’s Guide
12-9
Static Routes IPv4
Only Table
The system uses Static Routes to
search other networks for endpoint
addresses that are not found on the
local LAN.
Up to five routers can be defined in
addition to the Default Router. The
order in which the routers appear in the
list determines the order in which the
system looks for the endpoints on the
various networks. If the address is in
the local subnet, no router is used.
To define a static route (starting with
the first), click the appropriate column
and enter the required value.
Router IP
Address
Enter the IP address of the router.
Remote
IP
Address
Enter the IP address of the entity to be
reached outside the local network. The
Remote Type determines whether this
entity is a specific component (Host) or
a network.
• If Host is selected in the Remote
Type field, enter the IP address of
the endpoint.
• If Network is selected in the
Remote Type field, enter of the
segment of the other network.
Remote
Subnet
Mask
Enter the subnet mask of the remote
network.
Remote
Type
Select the type of router connection:
• Network – defines a connection to
a router segment in another
network.
• Host – defines a direct connection
to an endpoint found on another
network.
Table 2 Default Management Network Service – Routers (Continued)
Field Description