Filter
Top Products
Polycom RMX 2000/4000 Administrator’s Guide
15-5
[@domain name] - the RMX domain name as registered to the SIP Proxy
The dialing string:
[GW Profile ID]*[Destination Number, first
participant]*[Destination Number, second
participant]**[destination number]......*[Destination
Number, tenth participant]@domain name
Optional:
[GW Profile ID]*[Destination Number, first
participant]*[Destination Number, second
participant]**[destination number]......*[Destination
Number, tenth participant]@IP address of the RMX
signaling host
Optional:
[MCU prefix in SIP Proxy][GW Profile ID]*[Destination
Number, first participant]*[Destination Number, second
participant]**[destination number]......*[Destination
Number, tenth participant]@domain name
For example, if the GW Profile ID is 2000, the domain name is
service.polycom.com, and the destination number is 3456, enter:
2000*3456@service.polycom.com.
If using the IP address of the RMX signaling host (for example,
172.22.188.22) instead of the domain name enter:
2000*3456@172.22.188.22.
To invite two participants IP: 3456 and ISDN: 9251444, enter:
2000*3456*9251444@service.polycom.com.
To invite two participants IP: 3456 and PSTN: 9251234, enter:
912000*3456**9251234@service.polycom.com.
Gateway IVR
The calling method for ISDN and PSTN endpoints that can also be used
by IP endpoints when the destination dialing string includes the address
of the MCU only.
The calling endpoint enters the dialing string that includes the access
number to the RMX Gateway Profile.
The endpoint connects to the RMX and is welcomed by the IVR Welcome
slide and message: “Please enter the destination number” followed by the
dial tone.