Filter
Top Products
Polycom RMX 2000/4000 Administrator’s Guide
15-23
The Gateway Session automatically ends when only one participant is left
in the session.
Connected Participant Parameters
Once this conference is created, the calling participant is connected to it
and one or several dial-out participant(s) are automatically created and
added to this gateway session. The dial-in participant is also identified as
the chairperson of the conference.
The connecting (dial-in) participant name is taken from the endpoint. If
the endpoint does not send its name, it is derived from the Gateway
Profile display name and it includes the Gateway Session name, underscore
and a random number (appears between brackets), for example,
GW_Default_GW_Session(001)_(000).
The name of the destination (dial-out) participant is taken from the
endpoint. If the endpoint does not send its name, it is taken from the
dialed number. If the dialed number was an IP address, the system
displays underscores instead of dots, for example, 172_22_172_89.
Participants connected to a gateway session are monitored in the same way
as participants connected to ongoing conferences. For details, see RMX
2000 Administrator’s Guide, "Participant Level Monitoring” on page 9-14.