Filter
Top Products
Chapter 17-RMX Administration and Utilities
17-76
Audible Alarms
In addition to the visual cues used to detect events occurring on the RMX,
an audible alarm can be activated and played when participants request
Operator Assistance.
Using Audible Alarms
The Audible Alarm functionality for Operator Assistance requests is
enabled for each MCU in either the RMX Web Client or RMX Manager.
The Audible Alarm played when Operator Assistance is requested is
enabled and selected in the Setup > Audible Alarm > User
Customization. When the Audible Alarm is activated, the *.wav file
selected in the User Customization is played, and it is repeated according to
the number of repetitions defined in the User Customization.
If more than one RMX is monitored in the RMX Manager, the Audible
Alarm must be enabled separately for each RMX installed in the site/
configuration. A different *.wav file can be selected for each MCU.
When multiple Audible Alarms are activated in different conferences or
by multiple MCUs, the Audible Alarms are synchronized and played one
after the other. It is important to note that when Stop Repeating Alarm is
selected from the toolbar from the RMX Web Client or RMX Manager, all
activated Audible Alarms are immediately halted.
Audible Alarm Permissions
An operator/administrator can configure the Request Operator
Assistance audible alarm, however Users with different authorization
level have different configuration capabilities as shown in Table 17,
“Audible Alarm Permissions,” on page 16-75.l
Table 18 Audible Alarm Permissions
Option Operator Administrator
User Customization
Download Audible Alarm File