Filter
Top Products
Chapter 17-RMX Administration and Utilities
17-58
Port Usage
The RMX can be set to alert the administrator to potential port capacity
shortages. A capacity usage threshold can be set as a percentage of the
total number of licensed ports in the system.
When the threshold is exceeded, a System Alert is generated.
The default port capacity usage threshold is 80%.
The administrator can monitor the MCU’s port capacity usage via the Port
Gauges in the Status Bar of the RMX Web Client.
Setting the Port Usage Threshold
To Set the Port Usage Threshold:
1
In the
Setup
menu, click
Port Gauge
to open the
Port Gauge
dialog box.
2 Enter the value for the percentage capacity usage threshold.
The value is applied to the Audio and video resources according to
the Video/Voice Port Configuration.
The high Port Usage threshold represents a percentage of the total
number of video or voice ports available. It is set to indicate when
resource usage is approaching its maximum, resulting in no free
resources to run additional conferences. When port usage reaches or
exceeds the threshold, the red area of the gauge flashes and a System
Alert is generated. The default port usage threshold is 80%.
3 Click OK.
Status Bar
Usage Threshold