Filter
Top Products
Chapter 17-RMX Administration and Utilities
17-46
If another SD endpoint (11th) attempts to connect, the system first tries to
allocate resources to the SD endpoint first from HD720 and then from
HD1080 resources.
If HD resources are allocated to an SD endpoint, HD endpoints may
experience a resource deficiency when trying to connect and may not be
connected at HD resolution.
If there are no available HD resources the system tries to allocate
resources to the SD endpoint from any available CIF resources.
If there are no available CIF resources the system tries to allocate
resources to the SD endpoint from any available Audio Only resources. If
Audio Only resources are allocated the HD endpoint, it is connected as an
Audio Only participant.
Configuring the Video/Voice Resources in MPM Mode
To allocate Audio Only resources:
1 In the RMX menu, click Setup > Video/Voice Port Configuration.
The Video/Voice Port Configuration dialog box opens.
1
A single slider is displayed, calibrated according to licensed video
resources indicated in CIF ports in the RMX.
Resource re-configuration should only be performed when no conferences are
running on the RMX.
Resource Maximum from License