Filter
Top Products
Polycom RMX 2000 Administrator’s Guide
17-19
BONDING_DIALING
_METHOD
(ISDN)
When set to:
• SEQUENTIAL
The MCU initiates channel connections
sequentially until it reaches the number of
channels defined by the
BONDING_NUM_CHANNELS_IN
_GROUP flag.
When a channel is connected, dialing
begins for the next channel in the group.
• BY_TIMERS
The MCU initiates channel connections
sequentially using the values of the
BONDING_CHANNEL _DELAY and
BONDING_GROUP_DELAY flags.
The first group of channels is dialed, using
the BONDING_CHANNEL_DELAY
between dialing attempts for each channel
in the group.
The RMX then implements the
BONDING_GROUP_DELAY, before
dialing the first channel of the next group.
Default: SEQUENTIAL
CP_REGARD_TO
_INCOMING_SETUP
_RATE
For use in the Avaya Environment.
If set to YES, the RMX calculates the line rate
for incoming calls in CP conferences,
according to the line rate which is declared by
the endpoint in the H.225 setup message.
If set to NO, the rate is calculated according to
the conference line rate regardless of the rate
in the H.225 setup message.
Default: YES.
DELAY_BETWEEN
_H320_DIAL_OUT
_PARTY
(ISDN)
The delay in milliseconds that the MCU waits
when connecting dial out ISDN and PSTN
participants.
Default: 1000
Table 17-3 Manually Added System Flags – MCMS_PARAMETERS
(Continued)
Flag and Value Description