Filter
Top Products
Polycom RMX 2000/4000 Administrator’s Guide
1-17
Lecture View
Switching
Select this option to enable automatic switching of
participants on the Lecturer’s screen when Lecture
Mode is enabled for the conference.
The automatic switching is enabled when the number
of participants exceeds the number of video windows
displayed on the Lecturer’s screen.
Note: Lecture Mode is enabled in the Conference
Properties – Participants tab. For more information,
see "Lecture Mode” on page 2-23.
Send Content to
Legacy
Endpoints
When enabled (default), Content can be sent to H.323/
SIP/ISDN endpoints that do not support H.239 Content
(legacy endpoints) over the video (people) channel.
For more details, see Chapter 2, “Sending Content to
Legacy Endpoints” on page 2-16.
Notes:
• This option is enabled only in MPM+ Card
Configuration Mode and Resource Allocation Mode
is set to Flexible Mode.
• This option is valid when sending Content as a
separate stream is enabled in the System
Configuration and the flag: ENABLE_H239 is set to
YES.
• If High Definition Video Switching option is selected
in the Conference Profile - General tab, the Send
Content to Legacy Endpoints selection is cleared
and the option is disabled.
• If the Same Layout option is selected, the Send
Content to Legacy Endpoints selection is cleared
and is disabled.
Same Layout Select this option to force the selected layout on all
participants in a conference. Displays the same video
stream to all participants and personal selection of the
video layout is disabled. In addition, if participants are
forced to a video layout window, they can see
themselves.
Table 1-7 Profile Properties - Video Settings (Continued)
Field/Option Description