Filter
Top Products
8-8
Chapter 8 SXYX
3) Connect the ground wire to the ground terminal attached to the top of the
X-axis wiring box.
Ground terminal
Ground wire
An M4 small screw with spring washer and lock washer are attached to the
ground terminal. Arrange the parts in the order of the lock washer, ring-tongue
terminal and M4 small screw with spring washer, and then tighten. (Refer to
Fig. 8-9.)
M4 small screw with spring washer
Ring-tongue terminal
Lock washer
Fig. 8-9
4) Return the wiring box cover to the original position following steps 1 and 2
in reverse.
Lead out the ground wire from the user wiring outlet on the end face of the
X-axis wiring box.