Filter
Top Products
9-9
Chapter 9 MXYX
3-2 Moving arm type 2-axis model
For the moving arm type, an aluminum bracket is attached to the end of the
Y-axis. Install the tool on this bracket.
Twelve M6 coarse thread tap holes and two φ6 reamer holes are opened on the
bracket.
Fig. 9-10 Moving arm type
!
CAUTION
If the fitting length is less than 9mm, the threads could be damaged during
tightening. If the length of the bolt screw is 30mm or more from the installation
surface, the screw could contact the Y-axis.
Select the minimum fixing bolt screw length so that the screw fitting length is
9mm or more.
(Tolerance between knock (0.02)
12-M6×1.0
130
110
60
100
70
44
32
2-φ6H7 Depth6
20 10