Filter
Top Products
106 DCS-100 • User’s Guide
6. Upgrading Software
Software Upgrade Overview
pçÑíï~êÉ=réÖê~ÇÉ=lîÉêîáÉï
Firmware files for the DCS-100 are loaded into the hardware at power-up. These files are
stored in the unit’s onboard flash memory.
The DCS-100’s system software can be easily upgraded using the following steps:
• Download the appropriate “upgrade” file from the Barco FTP site or website.
• Connect a PC (or laptop) to the DCS-100.
• Launch a web browser.
• Connect to the DCS-100 using its IP address.
• Follow the upgrade instructions in the browser.
e~êÇï~êÉ=oÉèìáêÉãÉåíë
The following hardware items are required for upgrading DCS-100 software:
• IBM compatible computer with an available Ethernet port
• Local Ethernet network, including an Ethernet switch
pçÑíï~êÉ=oÉèìáêÉãÉåíë
The following list outlines software requirements for upgrading the DCS-100’s software:
• Ensure that your PC (or laptop) uses the Windows
®
2000 or Windows XP
operating systems.
• Ensure that your PC (or laptop) has a web browser installed, such as Windows
Internet Explorer
®
or Mozilla Firefox
®
.
Software files can be downloaded from either the Barco Folsom FTP site or the Barco
website, as described in the following “Downloading Software” section.