Filter
Top Products
16 DCS-100 • User’s Guide
NK==fåíêçÇìÅíáçå
About the DCS-100
going out, and all analog outputs, plus the freeze and LOGO store
functions are disabled when the DCS-100 processes HDCP content.
Refer to the “A Word About HDCP” section on page 18 for more details.
~ 1080i RGB input is supported on the DVI digital input.
• The following scaling and de-interlacing features are provided:
~ 10-bit scaling
~ 10-bit 4:2:2 de-interlacer with diagonal filter
~ 165MHz maximum pixel rate
~ Low video delay: Interlaced sources, 3 fields (max)
• Stores and recalls up to three full screen logos. When a logo is on Program, it
appears visually on top of all other sources, including inputs with keys.
• An Auto Take feature (in the User Preference Menu) supports transitioning from
one input source to another without pressing TAKE.
• Provides the ability to luminance key unscaled DVI sources. Please note:
~ Keys are set up from the Key Menu. The front panel KEY button is used
to enable or disable the key transition.
~ Key transitions are performed at the same rate as the full screen source
transitions.
~ If the key source resolution is greater than the output resolution, the
DCS-100 only displays an area equal to the output resolution. This area
is selectable using the menu.
~ If the key source resolution is less than the output resolution, the key is
centered on screen, and can be moved within the screen boundaries.
• Provides the ability to “auto acquire” input sources. The system monitors inputs at
all times, and if a timing change occurs, the system automatically reacquires and
displays the source — once the timing has been measured.
• Offers simple and intuitive menus:
~ Presentations can be switched without accessing any setup menus.
~ Two front-panel lockout modes enable you to lock out menu access,
either completely or partially.
• Provides an integrated test pattern generator.
• Offers an HD/SD SDI input as standard.
• Provides a built-in web-based GUI, which enables you to perform all setup and
transition functions, just like the front panel.
tÜ~íÛë=kÉï=áå=cáêãï~êÉ=sÉêëáçå=NKMP
This section lists the new or modified features that have been implemented since the last
revision of the DCS-100 User’s Guide. Reference links are provided for additional details.
• File Association
The DCS-100 provides the ability to save and recall up to 64 input configuration
files. This library of configuration settings is stored in non-volatile memory and is
available for use by each of the nine inputs (1 through 8, plus SDI). Refer to the
“File Association
” section on page 77 for detailed information about this feature.