Barco DCS-100 Welding System User Manual


 
DCS-100 • User’s Guide 13
NK==fåíêçÇìÅíáçå
få=qÜáë=`Ü~éíÉê
This chapter is designed to introduce you to the DCS-100 User’s Guide. Areas to be
covered are:
Chapter Structure
How to Use This Guide
Conventions
About the DCS-100
Connectivity Diagram
Application Questions
`Ü~éíÉê=píêìÅíìêÉ
The following chapters provide instructions for all aspects of DCS-100 operations:
Chapter 1, “Introduction” provides a system overview, a list of features, and a
system connectivity diagram.
Chapter 2, “Hardware Orientation” on page 21 provides detailed diagrams of the
system’s front and rear panels.
Chapter 3, “Installation” on page 29 provides comprehensive system installation
instructions.
Chapter 4, “Operation” on page 35 provides a menu tree, plus comprehensive
system operating instructions.
Chapter 5, “GUI Operations” on page 101 provides launch and operating
instructions for the system’s web-based GUI.
Chapter 6, “Upgrading Software” on page 105 outlines procedures for upgrading
system software components.
Appendix A, “Specifications” on page 113 lists the DCS-100’s specifications.
Appendix B, “Remote Control” on page 125 provides information regarding
remote control protocol.
Appendix C, “Contact Information” on page 155 lists important Barco contact,
RMA, warranty and technical support details.