Filter
Top Products
90 DCS-100 • User’s Guide
4. Operation
Using Freeze
rëáåÖ=cêÉÉòÉ
The FRZ (Freeze) button is used to create a still image from a video source.
Use the following steps to freeze and un-freeze an input:
1. Select the desired input and transition it to program with a TAKE.
2. Press the FRZ button to immediately freeze the source. The button lights.
3. To un-freeze the source, press FRZ again. The light turns off.
FRZ
Important
When a “protected” HDCP source is selected (inputs 7 or 8),
and an HDCP compliant monitor is connected to the output,
you cannot use the FRZ button.