Barco DCS-100 Welding System User Manual


 
96 DCS-100 • User’s Guide
4. Operation
Using Keys
jáñ=hÉó=açïå
Use the following steps to mix a key down:
Initial system state: Key is ON Program
Key Auto Take: ON
Figure 4-66. Mix Key Down
1. Press KEY to mix the key down.
jáñ=pçìêÅÉ=éäìë=hÉó=ré
Use the following steps to transition to a new source, and mix a key up:
Initial system state: Key is OFF Program
Key Auto Take: OFF
Figure 4-67. Mix Source Plus Key Up
1. Select the source that you want to be the next background. The button blinks.
2. Press KEY. The button blinks to indicate “pending.”
3. Press TAKE to transition to the new source and mix the key up.
jáñ=pçìêÅÉ=éäìë=hÉó=açïå
Use the following steps to transition to a new source, and mix a key down:
Initial system state: Key is ON Program
Key Auto Take: OFF
Figure 4-68. Mix Source Plus Key Down
1. Select the source that you want to be the next background. The button blinks.
2. Press KEY. The button blinks to indicate “pending.”
Black
Video
Key Source
Trans Time
Source 1
Black
Video
Trans Time
Source 1 Source 2
Key Source
Black
Video
Trans Time
Source 2 Source 1
Key Source