Filter
Top Products
DCS-100 • User’s Guide 15
NK==fåíêçÇìÅíáçå
About the DCS-100
^Äçìí=íÜÉ=a`pJNMM
The following topics are discussed in this section:
• Overview
• Features
• What’s New in Firmware Version 1.03
• A Word About HDCP
lîÉêîáÉï
DCS-100 is a high-quality presentation switcher designed to provide true seamless
switching between various input sources. High image scaling quality is maintained
throughout. DCS-100 offers straightforward and simple operating modes, and is ideal for
use in live events, company boardrooms, hotel ballrooms, houses of worship, and in
education and training facilities. As the ideal “simple” presentation switcher to learn and
operate, DCS-100 provides a full-screen output only, with no PIP capability.
DCS-100 accepts analog, DVI, and HD-SDI input sources and converts them to a wide
variety of output formats. Output video is provided on analog and DVI connectors
simultaneously. DCS-100 also allows you to capture and store up to three images to be
used as full-screen logos during the presentation. Any DVI source can be used as a
luminance key, providing an easy way for users to create titles and lower third graphics.
Please note:
• To ensure trouble-free orientation, installation and operation of your DCS-100,
please follow all procedures in the following chapters:
~ Chapter 2, “Hardware Orientation” on page 21.
~ Chapter 3, “Installation” on page 29.
~ Chapter 4, “Operation” on page 35.
• Should you have any questions regarding the installation or operation of the DCS-
100
=system, please consult with the factory. Refer to Appendix C, “Contact
Information” on page 155 for contact details.
cÉ~íìêÉë
The major features of the DCS-100 system are listed below:
• The system provides true seamless switching between all inputs and up to three
stored full-screen logos.
• The system supports input and output resolutions up to UXGA, including all HD
resolutions up to 1080p, eliminating the need to create custom output formats.
NTSC and PAL are supported as inputs only.
• Supports DVI, analog computer and video formats on the DVI-I inputs.
~ HDCP protocol is supported, and the DCS-100 is considered an HDCP
repeater in this configuration. Incoming encrypted data is encrypted
Note
Outputs cannot be interlaced.