Filter
Top Products
DCS-100 • User’s Guide 75
4. Operation
Using the Setup Menu
bafa=pÉíìé
From the System Menu, select EDID Setup to display the EDID Setup Menu, which
enables you to update the preferred EDID (Extended Display Identification Data)
resolution for the DCS-100.
Figure 4-42. EDID Setup Menu (sample)
EDID is a VESA standard data format that contains information about a display device and
its capabilities, including the preferred (as well as the allowed) device resolutions.
The DCS-100’s EDID file is stored in non-volatile memory. This file is read by a computer's
DVI graphics card during boot-up, when its DVI output is connected to a DVI-I input
connector on the DCS-100 system. The DCS-100 must be powered on first for the EDID
information to be read.
The following functions are available:
• Input — selects the inputs that you wish to program: ALL, 1, 2, 3, 4, 5, 6, 7, or 8.
• EDID Format — displays the current EDID format, and enables you to select a
new format to program into memory. Press SEL to program the preferred DVI
resolution, as defined on the EDID Format line.
When SEL is pressed, the following message is briefly displayed.
Figure 4-43. Programming EDID Message 1
EDID SETUP
> Input 7
1280x1024@60
Type (7, 8) Digital
Important
This menu is designed for advanced users only. Do not
reprogram EDID unless it is necessary.
Note
The DCS-100 can program the EDID EEPROM with the DVI
cable connected.
Programming EDID
Please wait...