Barco DCS-100 Welding System User Manual


 
148 DCS-100 • User’s Guide
_K==oÉãçíÉ=`çåíêçä
Remote Commands
12:"Black"
13:"Red"
14:"Green"
15:"Blue"
póëíÉã=`çãã~åÇë
^rql`cd=
Description: Auto Input Configuration Mode
Command Format: AUTOCFG -m (mode)
Parameters: -m (mode): 0 - off, 1 - on (default: off)
Query Format: AUTOCFG -?
Query Response: AUTOCFG -m (mode) --min 0 -- max 1
^rqlp^sb=
Description: Auto Input Settings Save
Command Format: AUTOSAVE -m (mode)
Parameters: -m (mode): 0 - off, 1 - on (default: off)
Query Format: AUTOSAVE -?
Query Response: AUTOSAVE -m (mode) --min 0 -- max 1
^rqlq^hb=
Description: Auto Take Mode
Command Format: AUTOTAKE -m (mode)
Parameters: -m (mode): 0 - off, 1 - on (default: off)
Query Format: AUTOTAKE -?
Query Response: AUTOTAKE -m (mode) --min 0 -- max 1
_ihqo^k=
Description: Sets whether going to black is a direct transition or requires a TAKE
Command Format: BLKTRAN -m (mode)
Parameters: -m (mode): 0 - do an immediate transition, 1 - take is required
(Default: off)
Query Format: BLKTRAN -?
Query Response: BLKTRAN -m (mode) --min 0 -- max 1
`lkqbuq=
Description: Sets menu context
Command Format: CONTEXT -m (mode)
Parameters: -m (mode): 0 - off, 1 - on