Filter
Top Products
8 Administrator’s Guide SurfControl RiskFilter - E-mail V5.2.4
F
INDING
YOUR
WAY
AROUND
Before you start
1
BEFORE YOU START
This Administrator’s guide assumes that you have completed the following steps:
1 Mounted the appliance using the supplied hardware set up guide.
2 Gathered the network information that is required for the configuration of the RiskFilter appliance.
3 Configured the RiskFilter appliance via your chosen connection, using the network information that
you gathered earlier. The RiskFilter Starter guide contains details of the different connection options.
4 Updated the SurfControl OS and software using the RiskFilter Management Console.
5 Activated your RiskFilter license.
6 Updated the Anti-Virus and Anti-Spam agents.
7 Configured Relay Control and e-mail-routing.
For instructions on how to carry out these steps refer to the Starter Guide which is supplied with the
RiskFilter appliance.