Filter
Top Products
SurfControl RiskFilter - E-mail V5.2.4 Administrator’s Guide 23
S
YSTEM
S
ETTINGS
General
2
2 In the Total Simultaneous Connections field, enter the maximum number of connections that you
want to be connected at any one time. The default setting is 200
.
3Select Enable POP3 Proxy.
4 Enter the following information:
• Incoming POP3 Port – The port number. The default port number is 110. Select the Require
Secure Channel (SSL) option if required. It is not selected by default.
• Back-end POP3 Server – The IP address or domain name of the e-mail server required to act as
your back-end proxy. In the Port field, enter the right port number. The default setting is 110. Select
the Require Secure Channel (SSL) option if required.
• Timeout – The timeout period in seconds, the default value is 600 seconds
.
5Select Enable Webmail Proxy.
6 Enter the following information:
• Incoming Webmail Port – The port number. The default port number is 80. Select the Require
Secure Channel (SSL) option if required.
• Back- end Webmail Server – The IP address or domain name of the e-mail server that is required
to act as your back-end proxy.
• Port – The port number, the default port number is 80. Select the Require Secure Channel (SSL)
option if required.
• Timeout – The time period for timeout in seconds. The default setting is 600 seconds.
7Select Enable IMAP Proxy.
8 Enter the following information:
• Incoming IMAP Port – The port number, the default port number is 143. Select the Require
Secure Channel (SSL) option if required.
• Back-end IMAP Server – The IP address or domain name of the e-mail server that is required to
act as your back-end proxy.
• Port – The port number. The default port number is 143. Select the Require Secure Channel
(SSL) option if required.
• Timeout – The time period for timeout in seconds, the default setting is 600 seconds.
9 After entering the above information, click Submit to save your settings. Click Reset to put all of the
information back to its original state.