Filter
Top Products
144 Administrator’s Guide SurfControl RiskFilter - E-mail V5.2.4
R
ISK
F
ILTER
S
YSTEM
M
ANAGEMENT
C
ONSOLE
The System Tab
5
To configure routing and gateways:
1Select Routing and Gateways from the Network Configuration tab.
2 For each route, choose the interface from the drop-down list box and enter the corresponding
gateway’s IP address into the Gateway field. You can enter up to two default routes.
3 Specify whether you want the RiskFilter System Management Console server to act as a router. You
can also specify static and local routes if necessary.
4 Click Save once you have entered your settings.
DNS Client
This module enables you to configure your system’s resolver settings:
Figure 5 - 13 The DNS Client screen
To configure the DNS Client:
1Select DNS Client from the Network Configuration tab.
2 Enter the hostname of your DNS server in the Hostname field.
3 Enter the IP addresses of your DNS servers into DNS servers fields.
4 Set the Resolution order using the drop-down list boxes then choose from the None or Listed options.
If you choose Listed you must enter the domains that you want the server to search in the pane
beneath.
Figure 5 - 14 The DNS Client screen
5 Click Save.