Filter
Top Products
SurfControl RiskFilter - E-mail V5.2.4 Administrator’s Guide 11
S
YSTEM
S
ETTINGS
General
2
GENERAL
The General menu contains sub-menus that enable you to set up the delivering and receiving of e-mails.
This includes specifying how RiskFilter should treat connections from other administrators, and where to
send alert messages and notifications.
CONFIGURATION
These settings are added in the Configuration screen.
Figure 2 - 2 The Configuration screen
Postmaster e-mail address
If a service stops, or a similar event occurs, RiskFilter can send a warning message to a predefined
address. This predefined postmaster e-mail address is usually the administrator’s.
To set up the Postmaster e-mail address:
1Select General > Configuration from the System Settings tab.
2 Enter the e-mail address of the administrator into the Administrator E-mail field. This is the address
that will receive the system warning messages.
3 Enter the e-mail address of the administrator into the Default Notification Sender E-mail field.
Notifications will be sent to the user from this address, informing them that the message has been
isolated.
4 Click Submit. For information on the other settings that can be entered into this screen see Table 1 on
page 12.