Filter
Top Products
146 Administrator’s Guide SurfControl RiskFilter - E-mail V5.2.4
R
ISK
F
ILTER
S
YSTEM
M
ANAGEMENT
C
ONSOLE
The System Tab
5
RUNNING PROCESSES
This screen tells you which processes are currently running, as well as when it first started up and the
command used to run it:
Figure 5 - 18 The Running Processes screen
SYSTEM TIME
The system time must be correct in order for licensing and updating to be trouble-free. To do this, the
server must use the Time Protocol. Information about this protocol can be seen at:
http://www.tf.nist.gov/service/its.htm
RiskFilter does not support the use of NTP servers. You can reset the system time and timezone in the
System Time screen:
Figure 5 - 19 The System Time screen
To reset the system time:
1Select System Time in the System tab.
2 Choose the date, month, year and hour from the drop-down list boxes in the System Time section.
3 Click Apply.
4 Enter the host name or IP address of the machine that you will use as your time server into the Time
Server secton.