Filter
Top Products
FIGURE F.28 – ON SWITCH LEADS
ON BUTTON REMOVAL AND REPLACEMENT PROCEDURE (continued)
REPLACEMENT PROCEDURE
1. Replace the ON Button.
2. Install the ON Button by pushing in and turning
a ¼ turn clockwise.
3. Connect the previously removed leads to the
ON Button.
4. Perform the Case Cover Replacement
Procedure.
5. Perform the Monitor and Pedestal
Replacement Procedure.
6. See Retest After Repair.
TROUBLESHOOTING AND REPAIR
F-69 F-69
VRTEX
TM
360
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC