Filter
Top Products
Mounting
Screws (4)
Lock Washer
W
asher
Pedestal
FIGURE F.14 – PEDESTAL MOUNTING BOLTS
MONITOR AND PEDESTAL REMOVAL AND REPLACEMENT PROCEDURE
(continued)
REPLACEMENT PROCEDURE
1. Install pedestal and secure using previously
removed mounting screws and associated
washers.
2. Loosely install previously removed top two
screws into the new monitor.
3. Slide monitor onto pedestal and install bottom
two screws previously removed.
4. Tighten all four phillips screws securing monitor.
5. Connect power supply cord and VGA cable pre-
viously removed. See Figure F.13.
6. See Retest After Repair.
TROUBLESHOOTING AND REPAIR
F-41 F-41
VRTEX
TM
360
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC