Filter
Top Products
FIGURE F.43 – VR GMAW/FCAW DEVICE LOCATION
VR GMAW/FCAW (MIG) DEVICE
REMOVAL AND REPLACEMENT PROCEDURE (continued)
REMOVAL PROCEDURE
1. Remove input power.
2. Perform the Monitor and Pedestal Removal
Procedure.
3. Perform the Case Cover Removal Procedure.
4. Locate the VR GMAW/FCAW Device. See
Figure F.43.
5. Using the 3/8” wrench, remove the two screws
holding the sheet metal strain relief to the front
panel. See Figure F.44.
6. Locate the VGA cable splice (audio style con-
nector) and disconnect. See wiring diagram.
7. Disconnect VGA cable splice “Y-adapter”.
Remove cable ties as necessary.
TROUBLESHOOTING AND REPAIR
F-94 F-94
VRTEX
TM
360
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC