Filter
Top Products
OPERATION
B-8 B-8
VRTEX
TM
360
Imperial
Metric
Abbreviation
Detail
Abbreviation
Detail
Coupon thickness
in
inches
mm
millimeters
Gas flow rate
CFH
cubic feet per hour
LPM
liters per minute
Wire feed speed
IPM
inches per minute
MPM
meters per minute
Weldometer - Base metal
lbs
kg
kilograms
Weldometer - Gas
CF
cubic feet
L
liters
Weldometer -Consumables
lbs
pounds
kg
kilograms
TM
TM
pounds
T
M
2. Language
Selecting the yellow language menu button brings up
the list of languages the software supports. Use the
joystick to highlight the desired language. Press the
red select button to accept. Press the yellow button
again to exit the language menu. The system stores
the language selection and will automatically start up in
the same language the next time.
3. Measurement Units
The blue unit menu button brings up the measurement
system. Use the joystick to highlight the desired unit of
measurement. Press the red select button to accept.
Press the blue again to exit the measurement unit
menu. Selecting Metric or Imperial converts the user
interface into the corresponding measurement system.
The system stores the measurement selection, so it
will automatically start up in the same unit of measure-
ment the next time. The system uses the units shown
in the table below.
4. Menu
The red menu button allows the student to shut down
the system. If the user selects shutdown, a submenu
appears asking the user if they are sure that they want
to shut down the system. This prompt prevents the
user from accidentally shutting down the system. If the
user selects “Yes”, the VRTEX
TM
360 will shut down.
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC