Filter
Top Products
DR4300 Circular Chart Recorder
84 DR4300 Circular Chart Recorder Product Manual 12/03
Step Operation Press Result
4
Select other function
parameters
FUNC
• Successive presses of the FUNC
key will
sequentially display the other function prompts of the
set up group you have selected.
• Stop at the function prompt that you want to change,
then proceed to the next step.
5
Change the value or
selection
or
• These keys increment or decrement the value or
selection that appears for the function prompt you
have selected.
• See Subsection 4.3.4
Configuration Tips for
instructions to increase or decrease value quickly.
• Change the value or selection to meet your needs.
• If the display flashes, you are trying to make an
unacceptable entry.
6
Enter the value or selection
FUNC
or
SET
UP
• This key selects another function prompt.
• This key selects another set up group.
The value or selection you have made will be entered
into memory after another key is pressed.
7
Exit Configuration
DISP
This exits configuration mode and returns the recorder
to the same state it was in immediately before you
entered configuration mode. Any changes made during
the configuration session are stored when configuration
mode is exited.
8
2-Pen Recorders
FUNC
For 2-pen recorders, press FUNC
key to select INP 2
for display and return to step 1 to configure the
parameters for pen 2.