Filter
Top Products
Setup Options-ECU
5.1 ECU (Spray ECU only)
ECU
Configuration
The ‘ECU Configuration’ window, in Figure 30 will only be displayed when ‘Spray ECU’ is
selected as the Controller.
ECU
Model
Select ‘ECU, ECU3’ option if the description on the overlay reads either ‘SPRAY ECU’,
‘SPRAY ECU 3’ or ‘Hardi 5500 SPRAY ECU’.
The corresponding part number on the Spray ECU is either A2036, A2445 or A2243.
Select ‘ECU 10S, ECU 10SR’ if the description on the overlay reads or ‘SPRAY ECU 10SR’. The
corresponding part number on the Spray ECU is A2644.
Select ‘ECU 30S’ if the description on the overlay reads ‘SPRAY ECU 30S’, the corresponding
part number is A2643.
Note: The ‘ECU Model’
‘‘EECCUU,,EECCUU33’’
, controller will come factory loaded with firmware version
BMS207 or higher.
The ‘ECU Model’s’ ‘ECU 10SR’ and ‘ECU 30S’ controllers will come factory loaded with
firmware version BMS 209 or higher.
Page 50
V1.98 21/06/06
FFiigguurree
3300::
OOppttiioonnss-
EECCUU
ppaaggee
((SSpprraayy
EECCUU
oonnllyy))